By Rhinotuning | 20 January 2023 | 0 Comments

Details and introduction to the Extremely popular push through center caps

In the United States, trucks and trailers are very much in demand, so push-through center caps have a larger market demand. push through center caps can be installed as long as they are the right size and fit many wheel brands, such as the very famous American Racing wheels, U.S. wheels, Pro Comp wheels, XD wheels, Weld racing, and so on. The fitment of push-through center caps is very wide.
https://www.rhinotuning.com/collections/push-through-center-caps
 

Rhinotuning has many types and sizes of push-through center caps all sizes are included, and the most popular is 4.25 push-through center caps. Also worth mentioning is that Rhinotuning has three materials, respectively stainless steel, carbon steel, and ABS plastic push-through center caps, you can choose different materials according to your car use scenario.

 

Rhinotuning has pushed-through center caps in three colors, one is high gloss black, one is matte black, and the other chrome, all three colors are very beautiful and can add luster and soul to your wheels, which is also the mission of Rhinotuning, and Rhinotuning is constantly working for it.

 

Here's how to test the size of a push-in wheel so you can better choose the right push-in hubcap.

First, measure the diameter of your hub at the center hole location, as marked "1" in the diagram.

Next, measure the diameter of the hub's camshaft as marked "2".

Finally, measure the exposed height of the camshaft of the hub as marked "3".

Once you have measured the necessary data for the hub, you are ready to look for the push-in hub.

Use the following image as an example.

Centre bore diameter "1": sizes from 108mm/4.25 into 1 into4.57in

Camshaft diameter "2": size less than 106mm/4.57in

Camshaft exposed height "3": size less than 90mm/3.66in


 

The installation method is shown in the figure.

First, you need to remove the wheel, push the push-in hubcap in from the back of the wheel to the outside, push the hubcap through the center centerle of the wheel, then rotate the slot at the bottom of the hubcap to the corresponding recessed position, finally follow the wheel to the car and tighten the screws.


These are the main points, if you have any other questions, please feel free to contact us.

Leave a Reply

Your email address will not be published.Required fields are marked. *
Name
E-mail
Content
Verification code